Removal and Installation
WARNING: This page is about a different car, the 2006 Mercury Milan, 2006 Lincoln Zephyr, and 2006 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the headliner. For additional information, refer to INTERIOR TRIM AND ORNAMENTATION .
- Disconnect the 4 roof opening panel drain hoses.
- Disconnect the electrical connector.
- Remove the 8 roof opening panel frame bolts and remove the roof opening panel frame.
- To install tighten to 12 Nm (9 lb-ft).
- To install, reverse the removal procedure.
- Initialize the roof opening panel motor. For additional information, refer to ROOF OPENING PANEL MOTOR INITIALIZATION .