Removal and Installation
WARNING: This page is about a different car, the 2006 Mercury Milan, 2006 Lincoln Zephyr, and 2006 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the digital signal processing (DSP) module. For additional information, refer to DIGITAL SIGNAL PROCESSING (DSP) MODULE .
- Disconnect the audio amplifier assembly electrical connector.
- Remove the 3 screws and the audio amplifiers and bracket assembly.
- Remove the 4 screws and the audio amplifiers.
- Disconnect the electrical connectors.
- To install, reverse the removal procedure.