LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1767 (Automatic Transaxle/Transmission - FNR5) >> In-Vehicle Repair >> Halfshaft Seal - LH >> Installation

Halfshaft Seal - LH: Installation

WARNING: This page is about a different car, the 2006 Mercury Milan and 2006 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the new differential fluid seal on the special tools.
    Fig 1: Identifying Special Tool And Differential Fluid Seal
    G04681818Courtesy of FORD MOTOR CO.
  2. Using the special tools, install the halfshaft seal.
    Fig 2: Identifying Special Tool
    G04681819Courtesy of FORD MOTOR CO.
  3. Install the LH halfshaft. For additional information, refer to FRONT DRIVE HALFSHAFTS .
scientia non olet · About LEMON Manuals