LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1767 (Automatic Transaxle/Transmission - FNR5) >> Diagnosis And Testing >> Preliminary Inspection >> Check Fluid Level >> Adding Fluid

Adding Fluid

WARNING: This page is about a different car, the 2006 Mercury Milan and 2006 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: The use of any other type of transaxle fluid than specified could result in transaxle damage.

If fluid needs to be added, add fluid in 0.25L (1/2 pint) increments through the oil filler tube. Do not overfill the fluid. For fluid type, refer to GENERAL SPECIFICATIONS .

scientia non olet · About LEMON Manuals