LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1762 (Anti-Theft - Pats) >> Removal And Installation >> Passive Anti-Theft System (PATS) Transceiver >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2006 Mercury Milan, 2006 Lincoln Zephyr, and 2006 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the 3 screws and the lower steering column shroud.
  2. Position the upper steering column shroud aside.
  3. Disconnect the electrical connector and remove the PATS transceiver.
    4. NOTE: No key replacement or re-initialization needs to occur with the removal or installation of a new PATS transceiver.
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals