LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1762 (Anti-Theft - Pats) >> General Procedures >> Key Programming Switch State Control >> Unlimited Key Mode Programming >> Disabling Unlimited Key Mode

Disabling Unlimited Key Mode

WARNING: This page is about a different car, the 2006 Mercury Milan, 2006 Lincoln Zephyr, and 2006 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
  1. Using a diagnostic tool, select instrument cluster from the menu. Follow SECURITY ACCESS to obtain security access. For additional information, refer to ANTI-THEFT SECURITY ACCESS .
  2. Select: DISABLE UNLIMITED KEY MODE.
  3. Select: IGNITION KEY CODE ERASE.
  4. Disconnect the diagnostic tool and turn the ignition lock cylinder to the OFF position.
  5. Program 2 keys to enable the vehicle by turning each key to the ON position. Make sure that each key remains in the ON position for a minimum of 6 seconds.
  6. Program any additional keys using either the KEY PROGRAMMING USING TWO PROGRAMMED KEYS  or KEY PROGRAMMING USING DIAGNOSTIC EQUIPMENT .
scientia non olet · About LEMON Manuals