Removal and Installation
WARNING: This page is about a different car, the 2006 Mercury Milan, 2006 Lincoln Zephyr, and 2006 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the smart junction box (SJB). For additional information, refer to MULTIFUNCTION ELECTRONIC CONTROL MODULES .
- Remove the LH A-pillar trim panel. For additional information, refer to INTERIOR TRIM AND ORNAMENTATION .
- Remove the RKE antenna.
- Disconnect the antenna retaining clips.
- Remove the RKE antenna.
- To install, reverse the removal procedure.