Removal and Installation

WARNING: This page is about a different car, the 2006 Mercury Milan, 2006 Lincoln Zephyr, and 2006 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.

Remove the wiper pivot arms. For additional information, refer to WIPER PIVOT ARM .
Remove the windshield wiper mounting arm and pivot shaft. For additional information, refer to WIPER MOUNTING ARM AND PIVOT SHAFT .
Remove the 2 drive rods from the motor crank arm ball joint.

Fig 1: Locating Motor Crank Arm Ball Joint
Courtesy of FORD MOTOR CO.
Remove the wiper motor-to-wiper mounting arm bolts and the wiper motor.
- To install, tighten to 8 Nm (71 lb-in).
To install, reverse the removal procedure.