LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1749 (Exterior Lighting) >> Removal And Installation >> Reversing Lamp >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2006 Mercury Milan, 2006 Lincoln Zephyr, and 2006 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the pin-type retainers and the luggage compartment decklid trim panel.
  2. Remove the 3 nuts (Milan) or 4 nuts (Zephyr) and the reversing lamp.
    • Disconnect the electrical connector(s).
  3. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals