Removal and Installation
WARNING: This page is about a different car, the 2006 Mercury Milan, 2006 Lincoln Zephyr, and 2006 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
- With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to JACKING & LIFTING .
- Remove the screw and the fender splash shield access cover.
- Remove the front parking lamp socket from the headlamp assembly.
- Remove the front parking lamp bulb.
- To install, reverse the removal procedure.
RH front parking lamp bulb
LH or RH front parking lamp bulb