LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1747 (Battery, Mounting And Cables) >> Removal And Installation >> Battery Tray >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2006 Mercury Milan, 2006 Lincoln Zephyr, and 2006 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the battery. For additional information, refer to BATTERY .
  2. Remove the 3 battery cable harness locators from the battery tray.
  3. Remove the battery tray bolt and nut.
    • To install, tighten to 9 Nm (80 lb-in).
  4. Remove the battery tray.
  5. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals