LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1745 (Manual Transaxle/Transmission And Clutch - General Information) >> Diagnosis And Testing >> Manual Transaxle and Clutch >> Pinpoint Tests >> Pinpoint Test H: Fluid Leakage >> Pinpoint Test H: Fluid Leakage

Pinpoint Test H: Fluid Leakage

WARNING: This page is about a different car, the 2006 Mercury Milan and 2006 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
  1. H1 INSPECT THE CLUTCH MASTER CYLINDER 
    • Inspect clutch master cylinder for leakage.
    • Is the clutch master cylinder OK? 

    Yes  : GO to H2.

    No  : REPAIR or INSTALL a new clutch master cylinder as necessary. REFER to CLUTCH CONTROLS .

  2. H2 INSPECT THE CLUTCH SLAVE CYLINDER 
    • Inspect clutch slave cylinder for leaks.
    • Is the clutch slave cylinder OK? 

    Yes  : GO to H3.

    No  : REPAIR or INSTALL a new clutch slave cylinder as necessary. REFER to CLUTCH CONTROLS .

  3. H3 INSPECT THE SYSTEM HYDRAULIC TUBES 
    • Inspect clutch hydraulic tubes for loose or damaged fittings causing leakage.
    • Are the clutch hydraulic tubes OK? 

    Yes  : Carry out a road test to VERIFY customer complaint.

    No  : REPAIR or INSTALL new components as necessary. TEST the clutch system for normal operation.

scientia non olet · About LEMON Manuals