LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1745 (Manual Transaxle/Transmission And Clutch - General Information) >> Diagnosis And Testing >> Manual Transaxle and Clutch >> Pinpoint Tests >> Pinpoint Test F: Hard Shifting >> Pinpoint Test F: Hard Shifting

Pinpoint Test F: Hard Shifting

WARNING: This page is about a different car, the 2006 Mercury Milan and 2006 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
  1. F1 CHECK THE FLUID LEVEL 
    • Key in OFF position.
    • Inspect the fluid level in the brake master cylinder reservoir.
    • Is the fluid level within the MAX and MIN level marks? 

    Yes  : GO to F2.

    No  : ADD brake fluid and CHECK for leaks in the clutch and brake systems.

  2. F2 CHECK THE CLUTCH PEDAL FREE PLAY 
    • Press the clutch pedal lightly by hand.
    • Measure the distance the clutch pedal travels.
    • Is the clutch pedal travel within 5-13 mm (0.20-0.51 in)? 

    Yes  : REFER to MANUAL TRANSAXLE/TRANSMISSION for transaxle concerns or MANUAL TRANSAXLE/TRANSMISSION EXTERNAL CONTROLS for gear shifter concerns.

    No  : CHECK the clutch pressure plate for damage. REFER to CLUTCH PRESSURE PLATE CHECK .

scientia non olet · About LEMON Manuals