LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1744 (Instrument Panel And Console) >> Removal And Installation >> Console - Overhead >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2006 Mercury Milan, 2006 Lincoln Zephyr, and 2006 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Fusion shown, Milan and Zephyr similar.
  1. Open the overhead console compartment door.
    Fig 1: Locating Overhead Console Compartment Door
    G04683689Courtesy of FORD MOTOR CO.
  2. From inside the compartment, remove the 2 screws.
  3. Remove the overhead console.
    • Disconnect the electrical connectors.
  4. To install, reverse the removal procedure.