LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1740 (Instrument Cluster) >> Removal And Installation >> Instrument Cluster Lens >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2006 Mercury Milan, 2006 Lincoln Zephyr, and 2006 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the instrument cluster. For additional information, refer to INSTRUMENT CLUSTER .
  2. Remove the screw.
    Fig 1: Locating Instrument Cluster Lens Screw
    G04682659Courtesy of FORD MOTOR CO.
  3. Release the 8 tabs and remove the lens.
    Fig 2: Locating Instrument Cluster Lens Tabs
    G04682660Courtesy of FORD MOTOR CO.
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals