Diagnosing Customer Concerns with Hard DTCs

WARNING: This page is about a different car, the 2006 Mercury Milan, 2006 Lincoln Zephyr, and 2006 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.

Most supplemental restraint system (SRS) diagnostic procedures will require deactivation and reactivation or depowering and repowering of the system. Deactivation and reactivation requires the disconnection of most SRS components and the installation of restraint system diagnostic tools. Depowering and repowering requires disconnection of the battery and removal of the restraints control module (RCM) fuse. This reduces the risk of inadvertent deployment of SRS components while diagnostic procedures are being carried out.

Restraint system diagnostic tools are required for the diagnosis and testing of the SRS. It is not acceptable to short-circuit the air bag module connections with a jumper wire. If a jumper wire is used to short-circuit the air bag module connections, a fault code (DTC) will be displayed.