Safety Belt Buckle Switches

WARNING: This page is about a different car, the 2006 Mercury Milan, 2006 Lincoln Zephyr, and 2006 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.

As part of the supplemental restraint system (SRS), the front safety belt buckles are equipped with safety belt buckle switches. The safety belt buckle switches are comprised of integrated circuits called Hall-effect sensors. The safety belt buckle switches (Hall-effect sensors) are located in the driver and passenger safety belt buckles. The safety belt buckle switches indicate to the RCM whether the safety belts are connected or disconnected. The RCM uses this information in determining the deployment rate of the dual-stage driver and passenger air bag modules. The RCM also communicates the driver safety belt buckle switch status to the instrument cluster module, which monitors the information to control the safety belt warning indicator. Refer to WARNING DEVICES for information on the instrument cluster module.