LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1724 (Automatic Transmission - 6 Speed) >> Disassembly And Assembly Of Subassemblies >> Torque Converter Hub Seal >> Assembly

Torque Converter Hub Seal: Assembly

WARNING: This page is about a different car, the 2006 Mercury Milan, 2006 Lincoln Zephyr, and 2006 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the torque converter hub seal in place.
    Fig 1: Positioning Torque Converter Hub Seal In Place
    G04681620Courtesy of FORD MOTOR CO.
  2. Using the special tool, install the torque converter hub seal.
    Fig 2: Installing Torque Converter Hub Seal
    G04681621Courtesy of FORD MOTOR CO.
  3. Install the torque converter.
    Fig 3: Locating Torque Converter
    G04681622Courtesy of FORD MOTOR CO.
  4. Install the transaxle. For additional information, refer to TRANSAXLE .
scientia non olet · About LEMON Manuals