LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1721 (Engine - 3.0L (4V)) >> In-Vehicle Repair >> Crankshaft Rear Seal >> Installation

Crankshaft Rear Seal: Installation

WARNING: This page is about a different car, the 2006 Mercury Milan, 2006 Lincoln Zephyr, and 2006 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
    NOTE: Clean all sealing surfaces with metal surface cleaner.
    NOTE: Apply clean engine oil to the seal lip and seal bore before installing the seal.
    Fig 1: Identifying Special Tools (303-384 And 303-178)
    G03898287Courtesy of FORD MOTOR CO.
  1. Using the special tools, install the crankshaft rear oil seal.
  2. Install the flexplate. For additional information, refer to FLEXPLATE .
scientia non olet · About LEMON Manuals