LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1721 (Engine - 3.0L (4V)) >> Disassembly And Assembly Of Subassemblies >> Cylinder Head >> Disassembly

Cylinder Head: Disassembly

WARNING: This page is about a different car, the 2006 Mercury Milan, 2006 Lincoln Zephyr, and 2006 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: If the components are to be reinstalled, they must be installed in the same positions. Mark the components removed for locations.
  1. Remove the hydraulic lash adjusters.
  2. Using the special tool, remove the keys, retainer and spring.
    Fig 1: Identifying Special Tools (303-300 And 303-350)
    G03898516Courtesy of FORD MOTOR CO.
  3. Remove the valve from the cylinder head.
  4. Remove the valve stem seal.
scientia non olet · About LEMON Manuals