LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1721 (Engine - 3.0L (4V)) >> Disassembly And Assembly Of Subassemblies >> Cylinder Head >> Assembly

Cylinder Head: Assembly

WARNING: This page is about a different car, the 2006 Mercury Milan, 2006 Lincoln Zephyr, and 2006 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
  1. Using the special tool, install the valve stem seal.
    Fig 1: Identifying Special Tools (303-470)
    G04680997Courtesy of FORD MOTOR CO.
  2. Install the valve.
  3. Using the special tool, install the valve spring, retainer and key.
    Fig 2: Identifying Special Tools (303-300 And 303-350)
    G03898516Courtesy of FORD MOTOR CO.
  4. Install the hydraulic lash adjusters.
    • Lubricate the hydraulic lash adjusters with clean engine oil.
scientia non olet · About LEMON Manuals