LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1703 (Exhaust System) >> Diagnosis And Testing >> Exhaust System >> Inspection and Verification

Inspection and Verification

WARNING: This page is about a different car, the 2006 Mercury Milan, 2006 Lincoln Zephyr, and 2006 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
  1. Verify the customer concern.
  2. Visually inspect the components of the exhaust system and related controls that may affect exhaust gas quality or loss of power.
  3. Visually inspect for obvious signs of mechanical damage.
    VISUAL INSPECTION CHART

    Mechanical
    • Exhaust pipe pinched or crushed
    • Damaged muffler
    • Broken or damaged exhaust hanger brackets
    • Damaged catalytic converter
    • Cracked exhaust manifold
    • Loose or damaged heat shields
  4. Verify that the exhaust system is installed correctly, with clamps correctly located and tightened to specification.
  5. If the fault is not visually evident, determine the symptom. GO to SYMPTOM CHART .