LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1686 (Instrument Panel And Console) >> Removal And Installation >> Instrument Panel Center Finish Panel - Freestyle >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2006 Mercury Montego, 2006 Ford Freestyle, and 2006 Ford Five Hundred. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the floor shifter trim ring.
  2. Remove the floor console center finish panel.
  3. Detach the instrument panel center finish panel.
    • Disconnect the electrical connectors.
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals