Removal and Installation
WARNING: This page is about a different car, the 2006 Mercury Montego, 2006 Ford Freestyle, and 2006 Ford Five Hundred. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect the battery. For additional information, refer to BATTERY DISCONNECT .
- Remove the steering column cover.
- Remove the 3 screws and the lower steering column shroud.
- Disconnect the PATS transceiver electrical connector.
- Release the tabs and remove the PATS transceiver.
- To install, reverse the removal procedure.
CAUTION:
Electronic modules are sensitive to electrical charges. If exposed to these charges, damage may result.