Removal and Installation

WARNING: This page is about a different car, the 2006 Mercury Montego, 2006 Ford Freestyle, and 2006 Ford Five Hundred. However, it is still accessible from the selected car via links, so may be relevant.

Open the wiper pivot arm nut cover.

Fig 1: Opening Wiper Pivot Arm Nut Cover
Courtesy of FORD MOTOR CO.
Remove the nut and the wiper pivot arm.
- To install, tighten to 25 N.m (18 lb-ft).
Fig 2: Removing Nut & Wiper Pivot Arm
Courtesy of FORD MOTOR CO.
To install, reverse the removal procedure.

Adjust the wiper pivot arms. For additional information, refer to WIPER BLADE AND PIVOT ARM ADJUSTMENT - WINDSHIELD .