Diagnosing Customer Concerns Without Hard DTCs

WARNING: This page is about a different car, the 2006 Mercury Montego, 2006 Ford Freestyle, and 2006 Ford Five Hundred. However, it is still accessible from the selected car via links, so may be relevant.

If a lamp fault code (LFC) is reported by the customer but is not present when the vehicle comes in for service, follow the DIAGNOSTIC INSTRUCTIONS procedure to identify the intermittent DTC.

Once the DTC is known, read the Normal Operation of the pinpoint test for the DTC involved.

Follow the deactivation procedure.
Determine the location of components involved in creating that code.
Carry out a thorough visual inspection of:
- Components.
- Connectors.
- Splices and wiring harnesses.
- Pinched wires.
- Worn insulation on conductors.
Refer to the Possible Causes of the pinpoint test for the DTC involved, which lists the common concerns that relate to the DTC. Concerns are listed according to priority.