Headlamp Assembly - Freestyle: Installation
WARNING: This page is about a different car, the 2006 Mercury Montego, 2006 Ford Freestyle, and 2006 Ford Five Hundred. However, it is still accessible from the selected car via links, so may be relevant.
- Connect the electrical connectors and position the headlamp assembly in place.
- Install the side headlamp assembly bolt.
- Tighten to 11 Nm (8 lb-ft).
- Install the front headlamp assembly bolt.
- Install the top outboard headlamp assembly bolt.
- Install the top inboard headlamp assembly bolt.
- Install the front bumper cover. For additional information, refer to REMOVAL AND INSTALLATION .