LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1662 (Instrument Cluster System) >> Removal And Installation >> Warning Indicator Bulb >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2006 Mercury Montego, 2006 Ford Freestyle, and 2006 Ford Five Hundred. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the instrument cluster. For additional information, refer to INSTRUMENT CLUSTER .
  2. NOTE: To remove the warning indicator bulb, rotate the bulb one quarter turn counterclockwise and lift it out from the instrument cluster.
    Fig 1: Locating Warning Indicator Bulb
    G04658134Courtesy of FORD MOTOR CO.
  3. Remove the warning indicator bulb(s) in question.
  4. To install, reverse the removal procedure.