LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1661 (Handles, Locks, Latches And Entry Systems) >> Removal And Installation >> Liftgate Latch >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2006 Mercury Montego, 2006 Ford Freestyle, and 2006 Ford Five Hundred. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the liftgate trim panel. For additional information, refer to REMOVAL AND INSTALLATION .
  2. Disconnect the liftgate latch electrical connectors.
  3. Disconnect the liftgate latch release cable.
  4. Remove the 3 bolts and the liftgate latch.
    • To install, tighten to 12 N.m (9 lb-ft).
  5. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals