LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1661 (Handles, Locks, Latches And Entry Systems) >> Description And Operation >> Handles, Locks, Latches and Entry Systems >> Deactivating/Activating Perimeter Lighting Feature

Deactivating/Activating Perimeter Lighting Feature

WARNING: This page is about a different car, the 2006 Mercury Montego, 2006 Ford Freestyle, and 2006 Ford Five Hundred. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
  1. The perimeter lighting feature may also be deactivated/activated using a scan tool.
  2. Make sure the ignition switch is in the OFF position and all doors are closed before beginning this procedure.
  1. Turn the ignition switch from the OFF to the RUN position.
  2. Press the unlock button on the door lock control 3 times.
  3. Turn the ignition switch from the RUN to the OFF position.
  4. Press the unlock button on the door lock control switch 3 times.
  5. Turn the ignition switch to the RUN position. The horn chirps one time to indicate that programming mode is entered.
    6. NOTE: The horn chirps once if the perimeter lighting is disabled or a chirp followed by a honk if the perimeter lighting is enabled.
  6. Press the unlock button twice within 5 seconds.
    7. NOTE: The horn chirps once to confirm the procedure is complete.
  7. Turn the ignition switch from the RUN to the OFF position.
scientia non olet · About LEMON Manuals