LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1655 (Rear Drive Axle/Differential) >> In-Vehicle Repair >> Drive Pinion Seal - Inner >> Removal

Drive Pinion Seal - Inner: Removal

WARNING: This page is about a different car, the 2006 Mercury Montego, 2006 Ford Freestyle, and 2006 Ford Five Hundred. However, it is still accessible from the selected car via links, so may be relevant.
    NOTE: The drive pinion inner seal is a double seal assembly.
  1. Remove the active on-demand coupling. For additional information, refer to ACTIVE ON-DEMAND COUPLING .
    2. CAUTION: The drive pinion seal is a 2-piece design. Remove both pieces.
  2. Using a suitable blind hole puller, remove and discard the drive pinion seal.
scientia non olet · About LEMON Manuals