LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1655 (Rear Drive Axle/Differential) >> In-Vehicle Repair >> Drive Pinion Seal - Inner >> Installation

Drive Pinion Seal - Inner: Installation

WARNING: This page is about a different car, the 2006 Mercury Montego, 2006 Ford Freestyle, and 2006 Ford Five Hundred. However, it is still accessible from the selected car via links, so may be relevant.
    CAUTION: If the drive pinion seal becomes misaligned in its bore during installation, install a new drive pinion seal.
    Fig 1: Identifying Special Tool
    G04655393Courtesy of FORD MOTOR CO.
  1. Using the special tool, install the drive pinion seal.
  2. Install the active on-demand coupling. For additional information, refer to ACTIVE ON-DEMAND COUPLING .
scientia non olet · About LEMON Manuals