LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1653 (Transfer Case - Power Transfer Unit (PTU)) >> In-Vehicle Repair >> Halfshaft Dust Seal - RH >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2006 Mercury Montego, 2006 Ford Freestyle, and 2006 Ford Five Hundred. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the RH halfshaft. For additional information, refer to REMOVAL .
  2. Remove and discard the halfshaft dust seal.
    3. NOTE: Always install a new halfshaft dust seal.
  3. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals