LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1651 (Uni-Body, SUBFRAME And Mounting System) >> Removal And Installation >> Subframe Bushings >> Removal

Subframe Bushings: Removal

WARNING: This page is about a different car, the 2006 Mercury Montego, 2006 Ford Freestyle, and 2006 Ford Five Hundred. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the front subframe. For additional information, refer to SUBFRAME - FRONT .
  2. Assemble the special tools to the front subframe.
    Fig 1: Identifying Special Tools On Front Subframe
    G04659825Courtesy of FORD MOTOR CO.
  3. Press out the subframe bushing.
scientia non olet · About LEMON Manuals