LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1649 (Brake System - General Information) >> Diagnosis And Testing >> Brake System >> Component Tests >> Brake Master Cylinder

Brake Master Cylinder

WARNING: This page is about a different car, the 2006 Mercury Montego, 2006 Ford Freestyle, and 2006 Ford Five Hundred. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the brake lines at the brake master cylinder.
  2. Plug the outlet ports of the brake master cylinder.
  3. Apply the brakes. If brake pedal height cannot be maintained, the brake master cylinder has an internal leak and a new brake master cylinder must be installed.
scientia non olet · About LEMON Manuals