LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1640 (HVAC Control System) >> Removal And Installation >> Register - Center, Five Hundred/Montego >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2006 Mercury Montego, 2006 Ford Freestyle, and 2006 Ford Five Hundred. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the instrument cluster finish panel. For additional information, refer to REMOVAL AND INSTALLATION .
  2. Remove the instrument panel trim panel.
  3. Disconnect the passenger airbag deactivation (PAD) indicator electrical connector.
  4. Disconnect the clock electrical connector (if equipped).
  5. Release the 4 clips and remove the RH center register.
  6. Release the 4 clips and remove the LH center register.
  7. To install, reverse the removal procedure.