LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1640 (HVAC Control System) >> Removal And Installation >> Clutch and Clutch Field Coil >> Removal

Clutch and Clutch Field Coil: Removal

WARNING: This page is about a different car, the 2006 Mercury Montego, 2006 Ford Freestyle, and 2006 Ford Five Hundred. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the A/C compressor. For additional information, refer to AIR CONDITIONING (A/C) COMPRESSOR .
  2. Remove the A/C clutch disc and hub nut.
    1. Hold the A/C clutch disc and hub with the special tool.
    2. Remove the nut.
    Fig 1: Removing A/C Clutch Disc & Hub
    G04658022Courtesy of FORD MOTOR CO.
  3. Remove the A/C clutch disc and hub.
  4. Remove the A/C compressor pulley snap ring.
    5. CAUTION: Do not use air tools. Damage to the A/C compressor pulley may result.
    Fig 2: Removing A/C Clutch Pulley
    G04658023Courtesy of FORD MOTOR CO.
  5. Using the special tool, remove the A/C clutch pulley.
  6. Remove the A/C clutch field coil snap ring.
  7. Remove the A/C clutch field coil.
    1. Remove the bolt.
    2. Remove the thermal limiter and A/C clutch field coil.
    Fig 3: Removing Thermal Limiter & A/C Clutch Field Coil
    G04658024Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals