LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1622 (Seat System -- F250-F550 Super Duty) >> Disassembly And Assembly >> Seat Cushion - Rear, SuperCab >> Disassembly and Assembly

Disassembly and Assembly

WARNING: This page is about a different car, the 2006 Ford Pickup, 2006 Ford F550 Super Duty, 2006 Ford F450 Super Duty, and 2006 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
    NOTE: 60 percent seat shown, 40 percent seat similar.
  1. Remove the seat. For additional information, refer to SEAT - REAR, SUPERCAB .
  2. Remove the latch. For additional information, refer to SEAT LATCH - SUPERCAB, REAR .
  3. Unclip the J-clip.
    Fig 1: Uncliping J-Clip
    G04646157Courtesy of FORD MOTOR CO.
  4. Remove the upholstery.
    Fig 2: Locating Upholstery
    G04646158Courtesy of FORD MOTOR CO.
  5. Remove the seat cushion foam pad from the frame.
  6. To assemble, reverse the disassembly procedure.
scientia non olet · About LEMON Manuals