Seat Cushion - Front, 20 Percent: Disassembly
WARNING: This page is about a different car, the 2006 Ford Pickup, 2006 Ford F550 Super Duty, 2006 Ford F450 Super Duty, and 2006 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the front seats. For additional information, refer to SEAT - FRONT, WITH SEAT INTEGRATED RESTRAINTS (SIR) or SEAT - FRONT, BUCKET AND 40 PERCENT .
- Remove the front seat. For additional information, refer to SEAT - FRONT, 20 PERCENT .
- Remove the seat backrest. For additional information, refer to SEAT BACKREST - FRONT, 20 PERCENT .
- Remove the seat latch. For additional information, refer to SEAT LATCH - 20 PERCENT .
- Remove the LH seat backrest bracket retaining bolts.
- Remove the 5 RH and LH seat riser retaining bolts.
- Unfasten the J-clips. Remove the seat cushion foam pad.
NOTE:
LH shown, RH similar.
- Position the seat cushion foam pad on the pan. Fasten the J-clips.
- Install the RH and LH seat riser retaining bolts.
- To install, tighten to 50 Nm (37 lb-ft).
- Install the LH seat back bracket bolts.
- To install, tighten to 50 Nm (37 lb-ft).
- Install the seat latch. For additional information, refer to SEAT LATCH - 20 PERCENT .
- Install the seat backrest. For additional information, refer to SEAT BACKREST - FRONT, 20 PERCENT .
- Install the front seat. For additional information, refer to SEAT - FRONT, 20 PERCENT .
- Install the front seats. For additional information, refer to SEAT - FRONT, WITH SEAT INTEGRATED RESTRAINTS (SIR) or SEAT - FRONT, BUCKET AND 40 PERCENT .
Assembly
NOTE:
LH shown, RH similar.