LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1622 (Seat System -- F250-F550 Super Duty) >> Disassembly And Assembly >> Seat Backrest - Rear, SuperCab >> Disassembly and Assembly

Disassembly and Assembly

WARNING: This page is about a different car, the 2006 Ford Pickup, 2006 Ford F550 Super Duty, 2006 Ford F450 Super Duty, and 2006 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the seat backrest. For additional information, refer to SEAT - REAR, SUPERCAB .
  2. Unclip the J-clips.
    Fig 1: Locating Seat Backrest
    G04646190Courtesy of FORD MOTOR CO.
  3. Remove the foam pad and upholstery from the seat backrest frame.
  4. Remove the upholstery from the foam pad.
  5. Remove the plastic J-clip.
  6. To assemble, reverse the disassembly procedure.
scientia non olet · About LEMON Manuals