LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1619 (Parking Aid System -- F250-F550 Super Duty) >> Removal And Installation >> Parking Aid Switch >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2006 Ford Pickup, 2006 Ford F550 Super Duty, 2006 Ford F450 Super Duty, and 2006 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the instrument panel switch plate.
    Fig 1: Locating Instrument Panel Switch Plate
    G04645426Courtesy of FORD MOTOR CO.
  2. Remove the parking aid switch.
    1. Disconnect the electrical connectors from the parking aid switch, rear defrost switch (if equipped), and transfer case control switch (if equipped).
    2. Release the locking tabs that retain the parking aid switch to the switch plate.
    3. Remove the parking aid switch from the switch plate.
      Fig 2: Identifying Parking Aid Switch Components
      G04645427Courtesy of FORD MOTOR CO.
  3. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals