LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1619 (Parking Aid System -- F250-F550 Super Duty) >> Removal And Installation >> Parking Aid Sensor >> Installation

Parking Aid Sensor: Installation

WARNING: This page is about a different car, the 2006 Ford Pickup, 2006 Ford F550 Super Duty, 2006 Ford F450 Super Duty, and 2006 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. To install the parking aid sensor in the rear bumper, insert the sensor in the opening until the retaining tabs lock in position.
  2. Connect the parking aid sensor electrical connector.
  3. After installing the sensor(s), use the diagnostic tool to verify that the parking aid sensor PIDs read no object present, 255 cm (100 in) and that the parking aid sensor attenuation PIDs read between 0-16 micro-seconds.
scientia non olet · About LEMON Manuals