LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1615 (Safety Belt System - F250-F550 Super Duty) >> Diagnosis And Testing >> Safety Belt System >> Component Test >> Functional Test - Retractor

Functional Test - Retractor

WARNING: This page is about a different car, the 2006 Ford Pickup, 2006 Ford F550 Super Duty, 2006 Ford F450 Super Duty, and 2006 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

The safety belt retractor assembly must be freely operational for extraction and retraction of the safety belt webbing between full extension and in-vehicle stowed positions.

  1. Extract and retract the safety belt between the full extension and stowed positions.
  2. Verify the retractor operates without excessive effort or binding.
  3. Install a new safety belt retractor and buckle if no obvious concerns are noticed and the complaint has been verified.
scientia non olet · About LEMON Manuals