LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1615 (Safety Belt System - F250-F550 Super Duty) >> Description And Operation >> Safety Belt System >> Fastening Safety Belts >> Notes

Fastening Safety Belts: Notes

WARNING: This page is about a different car, the 2006 Ford Pickup, 2006 Ford F550 Super Duty, 2006 Ford F450 Super Duty, and 2006 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
WARNING: Do not introduce slack into the safety belt system because the belt locks upon impact where it is positioned. Use the shoulder safety belt on the outside shoulder only. Never wear the shoulder safety belt under the arm. Never swing the shoulder safety belt around the neck over the inside shoulder. Never use a single belt for more than one person. Make sure the lap portion of the belt is fitted snugly and as low as possible around the hips, not the waist. Failure to follow these precautions could increase the chance and severity of injury in a collision.

Always follow the preceding safety precautions when fastening the safety belts.