LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 16 (Engine - 4.2L V6 - VIN 2) >> Removal & Installation >> Camshaft >> Inspection

Removal & Installation: Camshaft: Inspection

WARNING: This page is about a different car, the 2001 Ford Pickup, 2001 Ford Econoline, 2000 Ford Pickup, and 2000 Ford Econoline. However, it is still accessible from the selected car via links, so may be relevant.

Measure camshaft bore I.D., journal O.D., oil clearance and lobe lift. Replace camshaft if measurements are not within specification. See CAMSHAFT  table under ENGINE SPECIFICATIONS.

scientia non olet · About LEMON Manuals