LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 16 (Engine - 4.2L V6 - VIN 2) >> Overhaul >> Cylinder Head >> Valves

Cylinder Head: Valves

WARNING: This page is about a different car, the 2001 Ford Pickup, 2001 Ford Econoline, 2000 Ford Pickup, and 2000 Ford Econoline. However, it is still accessible from the selected car via links, so may be relevant.

Ensure head diameter, valve face runout, stem diameter and valve margin are within specification. See VALVES & VALVE SPRINGS  table under ENGINE SPECIFICATIONS.

CAUTION: DO NOT remove more than .010" (.25 mm) from end of valve stem when resurfacing tip of valve.
scientia non olet · About LEMON Manuals