LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 16 (Engine - 4.2L V6 - VIN 2) >> Overhaul >> Cylinder Block Assembly >> Fitting Pistons

Fitting Pistons

WARNING: This page is about a different car, the 2001 Ford Pickup, 2001 Ford Econoline, 2000 Ford Pickup, and 2000 Ford Econoline. However, it is still accessible from the selected car via links, so may be relevant.

Check piston-to-bore clearance. See PISTONS, PINS & RINGS  table under ENGINE SPECIFICATIONS. If clearance is not within specification, replace pistons and/or block. Oversize pistons are not available at this time.

scientia non olet · About LEMON Manuals