Oil Pump: Inspection
WARNING: This page is about a different car, the 2001 Ford Pickup, 2001 Ford Econoline, 2000 Ford Pickup, and 2000 Ford Econoline. However, it is still accessible from the selected car via links, so may be relevant.
Inspect components for damage and wear. Measure gear end height and radial clearance. Replace oil pump assembly if measurements are not within specification. See OIL PUMP SPECIFICATIONS table.
OIL PUMP SPECIFICATIONS
| Application | In. (mm) |
|---|---|
| Gear End Height | .0004-.0033 (.010-.083) |
| Gear Radial Clearance | .002-.006 (.05-.15) |
NOTE:
Oil pump is serviced as an assembly only. Replace assembly if measurements are not to specifications.