LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1599 (Handles, Locks, Latches And Entry Systems) >> Removal And Installation >> Tailgate Latch >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2006 Ford F550 Super Duty, 2006 Ford F450 Super Duty, and 2006 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Open the tailgate.
  2. Remove the 10 screws and the tailgate access panel.
  3. Disconnect the tailgate latch remote control actuating rods.
  4. Remove the 2 bolts and the tailgate latch.
    • To install, tighten to 25 Nm (18 lb-ft).
  5. To install, reverse the removal procedure.
    • If necessary, use multi-purpose grease spray to lubricate the latches.
scientia non olet · About LEMON Manuals