LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1599 (Handles, Locks, Latches And Entry Systems) >> Removal And Installation >> Door Latch Remote Control - Front >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2006 Ford F550 Super Duty, 2006 Ford F450 Super Duty, and 2006 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the interior front door handle. For additional information, refer to INTERIOR DOOR HANDLE - FRONT .
  2. Remove the interior door handle cup.
  3. Release the front door latch actuating cable locators.
    Fig 1: Locating Front Door Latch Actuating Cable Locators Screws
    G04646457Courtesy of FORD MOTOR CO.
  4. Remove the front door latch remote control.
    • Disconnect the cable conduit.
    • Disconnect the cable.
  5. To install, reverse the removal procedure.